3D printed ring

Top 10 3D Printed Jewelry & Rings

Often known as additive manufacturing, 3D printing is a course of of making three-dimensional objects from a digital file. There are numerous methods this may be carried out. Fused deposition modeling (FDM) is without doubt one of the most generally used 3D printing applied sciences. One other manner is thru stereolithography (SLA). On this article, we’ll check out among the most attention-grabbing jewellery and rings that may be made utilizing these fashionable applied sciences.

hexaogonal ring

Created from grey resin, this ring has a pretty repeating hexagonal sample on its outer floor. Its print decision, i.e. the thickness of every layer, is a really low 0.05mm (50 microns), so it gained’t be appropriate for a lot of lower-cost 3D printers. Its designer used a Formlabs Type 2 liquid resin desktop 3D printer to make it.

flashlight ring 3d printed

This is not simply any previous ring: it is a ring with flashlight performance built-in. Particularly, there may be one ultra-bright LED embedded into it. The parts and instruments required to make the ring are: needle nostril pliers, Sharpie marker, 1 watt ultra-bright LED, two watch batteries, and a high-quality gauge copper wire of two x 1″ (24 gauge).

It would be best to print the ring within the acceptable dimensions to suit the supposed wearer’s finger. The following step is to print a cap of the consumer’s alternative.

Afterwards, the circuit have to be wired up with copper wire, batteries, and LED. You need to check the LED to verify that the batteries are put in correctly. Watch out to not stare immediately on the LED, nonetheless, because it’s ultra-bright.


The final stage includes inserting the LED into the cap along with your fingers, twisting it into place till it’s positioned exactly in the precise place. The maker recommends that you just slowly twist the ring on and off just a few occasions.

triangular earrings vectary

These enticing earrings had been created utilizing VECTARY, a free 3D design interface and augmented actuality device. FDM printing was used to make them.

witch hat earrings

These witch’s hat novelty earrings could be a perfect accent for any Halloween get together. They had been designed utilizing Fusion 360 CAD software program and made with a MakerBot Replicator 2. The maker advises that they’ll print high-quality with a 0.2mm decision, however look even higher utilizing a 0.1mm decision.

snowflake earrings myminifactory

Print these in your subsequent Christmas get together or give them away to family members. The earrings had been designed with Autodesk software program, and printed with customary clear resin PR48 on an Autodesk Ember high-resolution printer at a 50-micron (0.05mm) layer top.

You possibly can print the design utilizing both digital mild processing (DLP) or stereolithography (SLA).

3d printed quilling heart

This romantic heart-shaped pendant with a rose in it makes for a superb present for Valentine’s Day or a special day comparable to a birthday or wedding ceremony anniversary.

The maker used an Anet A8 3D printer with Plexiwire ABS filament in white and purple. The pendant is straightforward to assemble: the rose-in-a-heart and coronary heart encompass items merely match into one another.

egyptian necklace 3d printed

This Egyptian pharaoh styled necklace is obtainable in a variety of colours. The maker recommends printing it at 0.2 mm layer top with 10% infill and 10 g of filament. It could take roughly one hour and 20 minutes to print this Egyptian necklace.

Selective laser sintering (SLS) 3D printing expertise was used for the creation of this necklace. This makes use of a high-powered laser to sinter (soften with out melting) the powder particles collectively to type a strong form.

neck of heart necklace 3d printed

This symmetrical linked coronary heart necklace was printed with a layer thickness of 0.12mm, wall thickness stored at 1.2, with a skirt however no brim or any extra assist. The primary STL file can be utilized to supply a standard-size necklace, or you should utilize the hyperlink STL file to print additional hyperlinks to make it bigger.

hummingbid low poly necklace pendant 3d printed

This pendant design is of a low-polygon hummingbird. It was printed utilizing a Formlabs Type 2 at 100-micron (0.1mm) layer top with clear resin. Both digital mild processing (DLP) or stereolithography (SLA) 3D printing expertise can be utilized for the printing of this necklace.

snakez bracelet 3d printed

This funky Snakez bracelet makes for an exquisite present. It’s out there in three sizes: small (18 hyperlinks), medium (20 hyperlinks), and huge (22 hyperlinks). The maker used a Minibot 120 with 0.2 mm decision to print this bracelet. Neodymium magnets are superglued to both finish of the necklace to lock it collectively.

Which Jewellery Will You Print?

On this article, we’ve taken a have a look at jewellery that has been utterly 3D printed! A few of these tasks use FDM printing; others use SLA expertise. Whether or not you like to print with PLA or resin, there’s one thing for everybody on this checklist. Should you haven’t carried out so already, be sure you take a look at our guides on 3D printing and the very best 3D printers.

The 5 Finest Low-cost 3D Printers for College students and Newcomers

Discovering an reasonably priced and dependable 3D printer generally is a problem. Listed here are the very best low cost 3D printers for you.

Learn Subsequent

About The Creator

Leave a Comment

Your email address will not be published. Required fields are marked *