How To Put An iPhone In Recovery Mode
Generally, the iPhone recovery mode can be used to restore a faulty or damaged operating system if an iPhone or iPad fails with a problem. When an iPhone switches to recovery mode, it loads a second charger, a program that checks the firmware and performs a series of tests to verify and confirm that things on your device are working as they should.
Apple recommends using iPhone Recovery Mode if the iPhone is stuck on the Apple logo, iTunes does not recognize your device or see a Connect to iTunes screen on your iPhone. You can switch your iPhone into recovery mode if you are in Finder or iTunes on a computer with a USB-to-Lightning cable.
If all else fails, you can restore your iPhone, iPod touch, iPad and iTunes in recovery mode. It is handy for mobile phones running on the iPhone.
iPhone Recovery Mode is a feature on your iPhone that allows you to recover corrupted iOS. If you are trying to update your iPhone and have not updated the software update and your iPhone is not responding, iPhone recovery mode will solve your problem. The iPhone recovery mode helps the iPhone get a clean version of iOS to work again.
If this does not work, switch the iPhone to restore mode by clicking on the “Restore” pop-up option. It will take about 10 seconds for the iPhone’s recovery mode screen to appear.
If your iPhone is in the iPhone recovery mode mentioned above, you should know that you have a backup plan. However, the recovery mode may not be as effective if your mobile phone has problems with other methods. To simplify the equation a little, here is a guide to the steps to put your iPhone into recovery mode.
On some iPhones, recovery mode is a failsafe troubleshooting mode that iTunes can use to repair the iPhone operating system if something goes wrong. It is a valuable way to fix an iPhone (or iPad) that does not recognize iTunes and sticks the Apple logo on the screen. As mentioned above, you can reinstall the software on your Apple iDevice, iPhone, iPad or iPod in recovery mode.
If your iPhone is in recovery mode for more than 15 minutes after your device exits recovery mode, there is probably a problem. An iPhone that never returns to the Apple logo after a reboot is a good candidate for recovery mode. If an iPhone has a low battery after going into recovery mode, you can wait 10 minutes and then connect it to a computer to restore it.
While it is possible to switch to recovery mode on the computer, it is impossible to restore an iPhone from the computer. You can make it clear by following the steps below to put your iPhone in laptop recovery mode. First, make sure you have backed up your iPhone to iTunes before turning it on.
The iPhone in recovery mode should not be the first step to troubleshooting, but it might be the only one that works. Can solve many problems with iPhones by restarting the device, but more complex issues may require putting the device into recovery mode. If you place your iPhone into recovery mode, it can be an expensive component.
iPhone Recovery Mode is the last step to troubleshooting an iPhone that has problems with its operating system. When a device is put into recovery mode, it can run from a computer and connect to iTunes, but not boot into iOS.
There are no universal activation policies for iPhone recovery mode, and it varies by device generation. As explained above, the iPhone does not have an essential key combination for recovery mode (the iPhone X and later generations lack the round home button).
On the other hand, if you decide to update or restore your iPhone from recovery mode, it will exit the recovery mode, and iTunes Finder will complete the process automatically. It is important to note that when leaving recovery mode, the iPhone will return to the previous state it was in when putting it into recovery mode at all. To do this, disconnect the iPhone from the computer and hold down the side button on the screen of the restore mode until everything is gone.
Press and hold your phone’s top and side buttons and volume up and down simultaneously until recovery mode appears. If the recovery mode does not work for some reason, you can go a bit more extreme and try to put the iPhone 12 into DFU mode, a low-level recovery mode for devices.
This article explains how to put an iPhone in recovery mode for all models, including the iPhone 8 and iPhone 7 series and earlier models.
Press and hold the side buttons and volume buttons until the Apple logo appears. To exit recovery mode, press the side button of your iPhone and release it with the Lightning cable until the MacBook logo disappears from the screen. Press and hold both side buttons until your iPhone is connected to iTunes and the screen appears.
To exit recovery mode on an iPad or iPhone 6s SE, press and hold the Home buttons and the Power buttons for about 15 seconds until the screen is empty. Press and hold the power buttons, side buttons and volume up and down simultaneously and hold them down until you see the iPhone in restore mode.
If the software download takes longer than 15 minutes, your device leaves recovery mode, and you need to put it back into recovery mode. With the help of the above steps, you should be able to put your iPhone into recovery mode, reset it and restore its function as usual. As we mentioned earlier, restoring your iPhone after a clean installation is one of the best procedures you can follow to avoid the loss of valuable data. Therefore, do backups regularly.